/*
* DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS HEADER.
*
* Copyright (c) 1997-2010 Oracle and/or its affiliates. All rights reserved.
*
* The contents of this file are subject to the terms of either the GNU
* General Public License Version 2 only ("GPL") or the Common Development
* and Distribution License("CDDL") (collectively, the "License"). You
* may not use this file except in compliance with the License. You can
* obtain a copy of the License at
* https://glassfish.dev.java.net/public/CDDL+GPL_1_1.html
* or packager/legal/LICENSE.txt. See the License for the specific
* language governing permissions and limitations under the License.
*
* When distributing the software, include this License Header Notice in each
* file and include the License file at packager/legal/LICENSE.txt.
*
* GPL Classpath Exception:
* Oracle designates this particular file as subject to the "Classpath"
* exception as provided by Oracle in the GPL Version 2 section of the License
* file that accompanied this code.
*
* Modifications:
* If applicable, add the following below the License Header, with the fields
* enclosed by brackets [] replaced by your own identifying information:
* "Portions Copyright [year] [name of copyright owner]"
*
* Contributor(s):
* If you wish your version of this file to be governed by only the CDDL or
* only the GPL Version 2, indicate your decision by adding "[Contributor]
* elects to include this software in this distribution under the [CDDL or GPL
* Version 2] license." If you don't indicate a single choice of license, a
* recipient has the option to distribute your version of this file under
* either the CDDL, the GPL Version 2 or to extend the choice of license to
* its licensees as provided above. However, if you add GPL Version 2 code
* and therefore, elected the GPL Version 2 license, then the option applies
* only if the new code is made subject to such option by the copyright
* holder.
*
*
* This file incorporates work covered by the following copyright and
* permission notice:
*
* Copyright 2004 The Apache Software Foundation
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
package javax.servlet.jsp;
import java.io.
IOException;
/**
* <p>
* The actions and template data in a JSP page is written using the
* JspWriter object that is referenced by the implicit variable out which
* is initialized automatically using methods in the PageContext object.
*<p>
* This abstract class emulates some of the functionality found in the
* java.io.BufferedWriter and java.io.PrintWriter classes,
* however it differs in that it throws java.io.IOException from the print
* methods while PrintWriter does not.
* <p><B>Buffering</B>
* <p>
* The initial JspWriter object is associated with the PrintWriter object
* of the ServletResponse in a way that depends on whether the page is or
* is not buffered. If the page is not buffered, output written to this
* JspWriter object will be written through to the PrintWriter directly,
* which will be created if necessary by invoking the getWriter() method
* on the response object. But if the page is buffered, the PrintWriter
* object will not be created until the buffer is flushed and
* operations like setContentType() are legal. Since this flexibility
* simplifies programming substantially, buffering is the default for JSP
* pages.
* <p>
* Buffering raises the issue of what to do when the buffer is
* exceeded. Two approaches can be taken:
* <ul>
* <li>
* Exceeding the buffer is not a fatal error; when the buffer is
* exceeded, just flush the output.
* <li>
* Exceeding the buffer is a fatal error; when the buffer is exceeded,
* raise an exception.
* </ul>
* <p>
* Both approaches are valid, and thus both are supported in the JSP
* technology. The behavior of a page is controlled by the autoFlush
* attribute, which defaults to true. In general, JSP pages that need to
* be sure that correct and complete data has been sent to their client
* may want to set autoFlush to false, with a typical case being that
* where the client is an application itself. On the other hand, JSP
* pages that send data that is meaningful even when partially
* constructed may want to set autoFlush to true; such as when the
* data is sent for immediate display through a browser. Each application
* will need to consider their specific needs.
* <p>
* An alternative considered was to make the buffer size unbounded; but,
* this had the disadvantage that runaway computations would consume an
* unbounded amount of resources.
* <p>
* The "out" implicit variable of a JSP implementation class is of this type.
* If the page directive selects autoflush="true" then all the I/O operations
* on this class shall automatically flush the contents of the buffer if an
* overflow condition would result if the current operation were performed
* without a flush. If autoflush="false" then all the I/O operations on this
* class shall throw an IOException if performing the current operation would
* result in a buffer overflow condition.
*
* @see java.io.Writer
* @see java.io.BufferedWriter
* @see java.io.PrintWriter
*/
abstract public class
JspWriter extends java.io.
Writer {
/**
* Constant indicating that the Writer is not buffering output.
*/
public static final int
NO_BUFFER = 0;
/**
* Constant indicating that the Writer is buffered and is using the
* implementation default buffer size.
*/
public static final int
DEFAULT_BUFFER = -1;
/**
* Constant indicating that the Writer is buffered and is unbounded; this
* is used in BodyContent.
*/
public static final int
UNBOUNDED_BUFFER = -2;
/**
* Protected constructor.
*
* @param bufferSize the size of the buffer to be used by the JspWriter
* @param autoFlush whether the JspWriter should be autoflushing
*/
protected
JspWriter(int
bufferSize, boolean
autoFlush) {
this.
bufferSize =
bufferSize;
this.
autoFlush =
autoFlush;
}
/**
* Write a line separator. The line separator string is defined by the
* system property <tt>line.separator</tt>, and is not necessarily a single
* newline ('\n') character.
*
* @exception IOException If an I/O error occurs
*/
abstract public void
newLine() throws
IOException;
/**
* Print a boolean value. The string produced by <code>{@link
* java.lang.String#valueOf(boolean)}</code> is written to the
* JspWriter's buffer or, if no buffer is used, directly to the
* underlying writer.
*
* @param b The <code>boolean</code> to be printed
* @throws java.io.IOException If an error occured while writing
*/
abstract public void
print(boolean
b) throws
IOException;
/**
* Print a character. The character is written to the
* JspWriter's buffer or, if no buffer is used, directly to the
* underlying writer.
*
* @param c The <code>char</code> to be printed
* @throws java.io.IOException If an error occured while writing
*/
abstract public void
print(char
c) throws
IOException;
/**
* Print an integer. The string produced by <code>{@link
* java.lang.String#valueOf(int)}</code> is written to the
* JspWriter's buffer or, if no buffer is used, directly to the
* underlying writer.
*
* @param i The <code>int</code> to be printed
* @see java.lang.Integer#toString(int)
* @throws java.io.IOException If an error occured while writing
*/
abstract public void
print(int
i) throws
IOException;
/**
* Print a long integer. The string produced by <code>{@link
* java.lang.String#valueOf(long)}</code> is written to the
* JspWriter's buffer or, if no buffer is used, directly to the
* underlying writer.
*
* @param l The <code>long</code> to be printed
* @see java.lang.Long#toString(long)
* @throws java.io.IOException If an error occured while writing
*/
abstract public void
print(long
l) throws
IOException;
/**
* Print a floating-point number. The string produced by <code>{@link
* java.lang.String#valueOf(float)}</code> is written to the
* JspWriter's buffer or, if no buffer is used, directly to the
* underlying writer.
*
* @param f The <code>float</code> to be printed
* @see java.lang.Float#toString(float)
* @throws java.io.IOException If an error occured while writing
*/
abstract public void
print(float
f) throws
IOException;
/**
* Print a double-precision floating-point number. The string produced by
* <code>{@link java.lang.String#valueOf(double)}</code> is written to
* the JspWriter's buffer or, if no buffer is used, directly to the
* underlying writer.
*
* @param d The <code>double</code> to be printed
* @see java.lang.Double#toString(double)
* @throws java.io.IOException If an error occured while writing
*/
abstract public void
print(double
d) throws
IOException;
/**
* Print an array of characters. The characters are written to the
* JspWriter's buffer or, if no buffer is used, directly to the
* underlying writer.
*
* @param s The array of chars to be printed
*
* @throws NullPointerException If <code>s</code> is <code>null</code>
* @throws java.io.IOException If an error occured while writing
*/
abstract public void
print(char
s[]) throws
IOException;
/**
* Print a string. If the argument is <code>null</code> then the string
* <code>"null"</code> is printed. Otherwise, the string's characters are
* written to the JspWriter's buffer or, if no buffer is used, directly
* to the underlying writer.
*
* @param s The <code>String</code> to be printed
* @throws java.io.IOException If an error occured while writing
*/
abstract public void
print(
String s) throws
IOException;
/**
* Print an object. The string produced by the <code>{@link
* java.lang.String#valueOf(Object)}</code> method is written to the
* JspWriter's buffer or, if no buffer is used, directly to the
* underlying writer.
*
* @param obj The <code>Object</code> to be printed
* @see java.lang.Object#toString()
* @throws java.io.IOException If an error occured while writing
*/
abstract public void
print(
Object obj) throws
IOException;
/**
* Terminate the current line by writing the line separator string. The
* line separator string is defined by the system property
* <code>line.separator</code>, and is not necessarily a single newline
* character (<code>'\n'</code>).
* @throws java.io.IOException If an error occured while writing
*/
abstract public void
println() throws
IOException;
/**
* Print a boolean value and then terminate the line. This method behaves
* as though it invokes <code>{@link #print(boolean)}</code> and then
* <code>{@link #println()}</code>.
*
* @param x the boolean to write
* @throws java.io.IOException If an error occured while writing
*/
abstract public void
println(boolean
x) throws
IOException;
/**
* Print a character and then terminate the line. This method behaves as
* though it invokes <code>{@link #print(char)}</code> and then <code>{@link
* #println()}</code>.
*
* @param x the char to write
* @throws java.io.IOException If an error occured while writing
*/
abstract public void
println(char
x) throws
IOException;
/**
* Print an integer and then terminate the line. This method behaves as
* though it invokes <code>{@link #print(int)}</code> and then <code>{@link
* #println()}</code>.
*
* @param x the int to write
* @throws java.io.IOException If an error occured while writing
*/
abstract public void
println(int
x) throws
IOException;
/**
* Print a long integer and then terminate the line. This method behaves
* as though it invokes <code>{@link #print(long)}</code> and then
* <code>{@link #println()}</code>.
*
* @param x the long to write
* @throws java.io.IOException If an error occured while writing
*/
abstract public void
println(long
x) throws
IOException;
/**
* Print a floating-point number and then terminate the line. This method
* behaves as though it invokes <code>{@link #print(float)}</code> and then
* <code>{@link #println()}</code>.
*
* @param x the float to write
* @throws java.io.IOException If an error occured while writing
*/
abstract public void
println(float
x) throws
IOException;
/**
* Print a double-precision floating-point number and then terminate the
* line. This method behaves as though it invokes <code>{@link
* #print(double)}</code> and then <code>{@link #println()}</code>.
*
* @param x the double to write
* @throws java.io.IOException If an error occured while writing
*/
abstract public void
println(double
x) throws
IOException;
/**
* Print an array of characters and then terminate the line. This method
* behaves as though it invokes <code>print(char[])</code> and then
* <code>println()</code>.
*
* @param x the char[] to write
* @throws java.io.IOException If an error occured while writing
*/
abstract public void
println(char
x[]) throws
IOException;
/**
* Print a String and then terminate the line. This method behaves as
* though it invokes <code>{@link #print(String)}</code> and then
* <code>{@link #println()}</code>.
*
* @param x the String to write
* @throws java.io.IOException If an error occured while writing
*/
abstract public void
println(
String x) throws
IOException;
/**
* Print an Object and then terminate the line. This method behaves as
* though it invokes <code>{@link #print(Object)}</code> and then
* <code>{@link #println()}</code>.
*
* @param x the Object to write
* @throws java.io.IOException If an error occured while writing
*/
abstract public void
println(
Object x) throws
IOException;
/**
* Clear the contents of the buffer. If the buffer has been already
* been flushed then the clear operation shall throw an IOException
* to signal the fact that some data has already been irrevocably
* written to the client response stream.
*
* @throws IOException If an I/O error occurs
*/
abstract public void
clear() throws
IOException;
/**
* Clears the current contents of the buffer. Unlike clear(), this
* method will not throw an IOException if the buffer has already been
* flushed. It merely clears the current content of the buffer and
* returns.
*
* @throws IOException If an I/O error occurs
*/
abstract public void
clearBuffer() throws
IOException;
/**
* Flush the stream. If the stream has saved any characters from the
* various write() methods in a buffer, write them immediately to their
* intended destination. Then, if that destination is another character or
* byte stream, flush it. Thus one flush() invocation will flush all the
* buffers in a chain of Writers and OutputStreams.
* <p>
* The method may be invoked indirectly if the buffer size is exceeded.
* <p>
* Once a stream has been closed,
* further write() or flush() invocations will cause an IOException to be
* thrown.
*
* @exception IOException If an I/O error occurs
*/
abstract public void
flush() throws
IOException;
/**
* Close the stream, flushing it first.
* <p>
* This method needs not be invoked explicitly for the initial JspWriter
* as the code generated by the JSP container will automatically
* include a call to close().
* <p>
* Closing a previously-closed stream, unlike flush(), has no effect.
*
* @exception IOException If an I/O error occurs
*/
abstract public void
close() throws
IOException;
/**
* This method returns the size of the buffer used by the JspWriter.
*
* @return the size of the buffer in bytes, or 0 is unbuffered.
*/
public int
getBufferSize() { return
bufferSize; }
/**
* This method returns the number of unused bytes in the buffer.
*
* @return the number of bytes unused in the buffer
*/
abstract public int
getRemaining();
/**
* This method indicates whether the JspWriter is autoFlushing.
*
* @return if this JspWriter is auto flushing or throwing IOExceptions
* on buffer overflow conditions
*/
public boolean
isAutoFlush() { return
autoFlush; }
/*
* fields
*/
/**
* The size of the buffer used by the JspWriter.
*/
protected int
bufferSize;
/**
* Whether the JspWriter is autoflushing.
*/
protected boolean
autoFlush;
}